The Master Plasterers Site

Dan Warr

Building, renovating or need repairs to cracked, weathered or uneven walls? Call the Perth Master Plasterers.

2018 Plasterer’s Salaries In Sydney

When you’re looking into jobs one aspect that should be considered, after determining if the job is one you want to do, is how much you can potentially make. This usually involves doing some research, but it is worth it because it lets you know if you will make enough to support your family or not. In this post we provide some information on how much money plasterer’s are projected to make in the year 2018 in Sydney.



Now, what we are going to provide will be a couple of figures for you to consider. The first one is an hourly rate for a plasterer and the second will be the yearly rate.



Hourly & Yearly Plasterers Salaries in Sydney



A plasterer in Sydney has a median wage of AU$30.46 per hour. However, one the lower side of the scale it comes out to AU$24.55 per hour and on the higher end of the pay scale for more experience it comes out to AU$44.70 on the hour. That is going to allow for a fairly broad range of yearly pay as the salary range will go from AU$49,132 on the lower end of the scale and go all the way up to AU$96,234. So as you can tell this is a wide figure and allows for a fairly comfortable living.



Plastering can be a very rewarding job field and it is one that has a decent pay as well. All that potential plasterers have to do is make sure they know about the different salary ranges and the training involved. Based on this article you can be confident in your future earning potential as a plasterer.



Our Sydney & NSW Locations:



Sydney Inner West | Sydney Eastern Suburbs | Western Sydney | Sydney Northern Beaches | Orange | Tamworth | Port Macquaire | Newcastle | Wollongong | Maitland | Coffs Harbour









via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/plasterers-salaries-sydney/

10 Best Ceiling Repair Experts in Adelaide SA

Leaks, cracks, or continuous noise can drive property owners crazy. Ceilings face a lot of pressure and remain an integral part of the structure, which is why it’s important to repair them as soon as possible. If the damage is ignored, it will only make things worse.



For those in Adelaide, it’s time to look at a world-class ceiling repair expert and call them in immediately.



Here are the top ten ceiling repair experts in Adelaide.



1) The Master Plasterers



This team is professional, proven, and is one of the best in the business. Their level of commitment and modern tools are impossible to beat. When it comes to bringing the ceiling back to 100%, Master Plasterers should be the first team that’s called in. This is a service that has been around for a while and is able to set the standard when it comes to high-quality repairs.



2) Amacris Builders



This is one of the market leaders and is a robust group with years of experience. For a resounding solution that is able to bring home results, there aren’t too many better teams than Amacris Builders. The quality of their craftsmanship is hard to deny and it’s what makes them stand out.



3) Renomate



This is a world-class company that has been able to make a name for itself as a swift and legitimate repair service. With years of expertise and the willingness to maximise tools, Renomate is a unique fit for all property owners. It’s one of the leading experts in town.



4) Handy Andy



This is a self-made handyman that has been able to develop a core business in the heart of Adelaide. For anyone that is prepared to sign up and get their ceiling repaired, Andy is a good fit for most. He is competent, fast, and able to deliver solid results.



5) Max’s Home Maintenance



Max has been around for a while and is a self-made handyman with years of expertise. He is a great professional and will be able to offer wonderful deals on the repair work. For anyone looking to call in a small team, this is a good service to go with.



The Master Plasterers Locations in Adelaide:



Adelaide Hills | Port Adelaide | Adelaide | Adelaide SA



6) CleverCeilings



One of the top services in the region would be CleverCeilings and it is primarily focused on ceilings. This offers good specialised service for those prepared to have someone come to work on the property. The team is courteous, proven, and able to work at a good pace.



7) Practical Home Maintenance



Having a professional come in and take a look at the ceiling is important and this is an ideal service. It is a competent team of ceiling repair specialists that will be able to come in and get the job done. The ceiling will be good to go in a hurry.



8) Austral Constructions



Austral Constructions has been embedded in the community for years and has a good track record when it comes to delivering results as a ceiling repair service. It can handle an assortment of repairs and get them done as soon as necessary.



9) Crack Fix Adelaide and Convert it



Whether it is a small leak or a major crack, this is a suitable service that is home to multiple top-tier ceiling repair experts. The quality will be something that stands out in seconds.



10) Jr All Carpentry



Being able to call in a robust repair service such as this one is useful and it is going to deliver incredible results. The team has the ability to work on a wide array of ceiling-related services and has a fully qualified team ready to go.







via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/10-best-ceiling-repair-experts-adelaide/

How Much Does It Cost To Repair A Water Damaged Ceiling In Adelaide?

Water damage is one of the most common ceiling issues in Adelaide Australia. Water leakages can result from rain, burst pipes, or the tenants above. If you see an indication of water damage on your ceiling, the best thing to do is to call a professional to take care of the problem. If you can catch the leak early on, the damage could be minor, and you will save money in the process. But if you wait long enough until the water seeps into the walls, the repair could cost a lot more. In fact, the cost of repairing a water damaged ceiling in Adelaide could be very expensive. A professional ceiling repair service in Adelaide will have to fix the source of the water leak as well as restore the damaged ceiling to its original state. This article provides information on how much it costs to repair a water damaged ceiling in Adelaide.



The Average Cost of Fixing a Water Damaged Ceiling in Adelaide



A water damaged ceiling should be repaired immediately to prevent serious damage to the structure of your home. On the other hand, water damage could result in mould growth and many other health issues for your family. That is why it is important that you seek immediate professional assistance to fix the problem before it is too late. The average cost of repairing a water damaged ceiling in Adelaide and most other cities in Australia is estimated at AU$2,164. Most homeowners have reported paying between AU$150 to AU$6,000 for such repairs. In fact, the average range of repairing a water damaged ceiling in Adelaide is between AU$1,214 to AU$2,254.



How to Identify Water Damage On Your Ceilings:



There are many reasons for water damaged ceilings in Adelaide Australia. In fact, the most common cause is a leaky roof – as reported by the majority of homeowners in the area. A burst pipe embedded within the walls of a house is another cause for this. Most homeowners aren’t aware that their roof is leaking until they find water dripping from the surface of the ceiling. The ceiling is usually made of plaster or drywall. The water will pool and spread on the ceiling until it starts to drip in between the panels of the ceiling. If you have a plaster ceiling in your home, the water will usually build up before dripping to the floor. The dampness resulting from a leaky roof will stain and degrade the integrity of your ceiling. When the ceiling remains in such a condition for several days, it can result in the build-up of mould and mildew. This can spread diseases in your home. That is why it is essential that you seek immediate professional assistance when you have a water damaged ceiling.



Water damage restoration takes some time to complete. The professional will get rid of the dampness on the ceiling before doing anything else. They may use special dryers for this purpose. This is very important to prevent the spreading of mould and mildew on the wet surface. The technician will fully assess the situation before coming up with a realistic estimate to deal with your problem.



Our Locations in South Australia:



Adelaide | Port Adelaide | Adelaide SA | Adelaide Hills









via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/cost-repair-water-damaged-ceiling-adelaide/

Perth Gyprocker Salaries In 2018





A gyprocker or plasterer works in the construction field in Australia. He is a construction specialist who works with plaster or a paste-like construction fabrication material. The gyprocker will assist in the completion of remodelling, repair, and renovation work. Many of the traditional ceilings in Australian homes use a form of plaster as a key component and reinforcer. In fact, a gyprocker may usually be employed by a construction or contracting company in Perth. On the other hand, they also work as independent contractors across Perth and the other parts of Australia. This article provides information on Perth gyprocker salaries in 2018.



A gyprocker job requires a great deal of speed and dexterity. It usually involves the coating of residential and commercial ceilings and walls with different types of plaster to facilitate the decoration of such surfaces. The job doesn’t involve handiwork alone. In fact, math plays an important role in deciding how much plaster to mix and how much materials to order to keep the work going on without any disruptions. A gyprocker should be prepared to work around 40 hours a week. Overtime will increase your salary since there will be evening and weekend work to meet the deadlines of the project. Self-employed contractors are able to negotiate their own wages for individual projects. Their earnings can be much higher than working under a contractor or construction firm.



Gyprocker Hourly Rates



Although formal qualifications are not 100% required to work as a plasterer, the on-site experience is essential for such a job. The average wage of a gyprocker in Perth in 2018 is AU$27.41 per hour. The more experience and skills the individual has, the higher the salary he could expect. The typical tenure for a gyprocker is 1-3 years.



There are many courses in Australia for a gyprocker to improve his skills. In fact, there are many government apprentice schemes and combined classroom work with onsite experience that will help an individual build his skills in the field. Make sure that you follow a reputable course if you want to take your plastering skills to the next level.



Whether you need the services of a gyprocker for a residential or commercial project, you should hire a reliable and experienced professional for the job. There are hundreds of gyprockers out there. But all of them are not created equal. That is why you should be doing the research when choosing the best plasterer in Perth.



Our Ceiling Restoration, Renovations & Repairs:



Perth | Fremantle | Joondalup | Rockingham | Mandurah









via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/perth-gyprocker-salaries-2018/

Huge Guide to Ceiling & Roof Repairs

In this huge guide we’ll cover all sorts of information about ceiling and roof repairs. Whatever your questions about fixing ceilings or roofs, we’re likely to answer them in this guide. But if this guide doesn’t answer your questions fell free to contact us and we’ll get your questions answered.





How to Fix a Sagging Gyprock Ceiling





Follow these steps to fix your sagging gyprock ceilings:







First, you will need to remove any fitted cornices and use a level and a straightedge to find the lowest spot on your ceiling.


Once you have marked the lowest spot, measure down 24mm. This gives you clearance to add in 18mm batten and a 6mm leeway.


Next, you will need to locate each end of your ceiling joist.


The battens you will be using are 68mm x18mm.


Cut the batten strips to fit between your walls and hold them in place temporarily by partially driving in a plasterboard screw.


Shim the battens so that they are level and then screw into the ceiling frame using screws that are long enough to penetrate at least 25mm into your ceiling framing.


Use a string line to ensure that the battens are straight and level.


Take the gyprock and place it up to your ceiling to ensure an accurate fit.


Screw the gyprock into the battens and ceiling joists.


If your ceiling has a light fixture, you will need to contact a licensed electrician and have the fixtures removed. Ask the electrician to leave enough wire exposed to help you properly place your light fixture.






Resources: fix a sagging plasterboard ceiling









How to Repair Water Damaged Ceiling Paint





Follow these steps to repair water damaged ceiling paint:







    The first thing you need to do is clean the water damaged area


    Next you need to clear and scrape any flaking


    Use Peel-Stop or Sealer Binder to cover the water damaged area


    Apply the filler to the area


    Once dry sand the surface until it’s smooth and even


    The last step before painting is to apply water-based Primer / Sealer


    Finally paint over the water damaged area






Resources: how to repair water damage in your living room





Why is the paint bubbling and peeling?





Paint bubbles don’t always appear immediately after the wet surface has dried. They can appear weeks or even months later. Paint bubbling happens when heat and/or moisture on the underlying surfaces causes the paint to lose adhesion and lift up. Eventually the bubbles and blisters will result in peeling.





How to fix a Sagging ceiling Joist





Here’s how to fix a sagging ceiling joist:





A sagging ceiling problem can be fixed by bolstering the joists with a two-piece strongback.


You need to attach a wooden plank (stood vertically for maximum strength) to the ceiling frame arranged so that it intersects the joists at the place where the ceiling is sagging.






How to Repair Water Damaged Ceiling Plaster





Follow these 12 steps to repair water damaged ceiling plaster:



1) Dry the patch out.



2) Scrape off any paint or loose materials, removing any bits that are damaged.



3) Use sealer or primer to coat every stain.



4) Be on the lookout for all spots of loose point which might have gotten missed. Catch them before things dry.



5) Clean away all the debris before you complete the priming.



6) After the primer gets dry, use a knife to scrape off any remaining debris.



7) Apply your first coat of mud or joint compound across the damaged area.



8) Create an even surface by lightly dry sanding.



9) Remove any sanding dust by wiping with a damp rug before you let it dry once again.



10) Apply your second coat of mud or joint compound before sanding again after it is dry once more.



11) Use an additional coat of primer to cover the area.



12) Finish everything up with one coat of paint.





Need your ceilings repaired? Here are our locations:



Perth Joondalup Fremantle Mandurah Rockingham Bunbury Sydney Inner West Sydney Eastern Suburbs Western Sydney Orange Newcastle Adelaide Adelaide Hills Port Adelaide Melbourne CBD Melbourne South East Melbourne Western Suburbs Melbourne East Melbourne Northern Suburbs Brisbane North Brisbane West Brisbane South Side Gold Coast





What Causes Sagging Ceilings?





People will often ask why ceilings sag. The simple answer is that some of the fixings holding the ceiling timbers to the plasterboard sheets have begun to fail. A plasterboard ceiling is typically fixed using a combination of nails or screws and stud adhesive. Here are some more reasons why ceilings start to sag:









    Poorly Fixed Plasterboard









It is common for poor work practices regarding the fixing of plasterboard sheets to result in ceilings that do not last as long as the remaining areas of the structure. Unfortunately, it is not possible to tell if plasterboard sheets are fixed correctly until the sheets begin to fail. The reason for this is that the strength of the system relies fully on the use of stud adhesive and stud adhesive cannot be checked until a ceiling is fixed. Each of the six-metre ceiling sheets weigh approximately fifty kilograms and without correctly applied stud adhesive, the nails in the plasterboard will not be able to hold the weight over a prolonged time span.





When a single screw or nail ‘pops’ or falls through the plasterboard, it places more weight on surrounding nails or screws until they all turn in and fail. Slowly, you will start to notice a sagging affect in the ceiling areas and this is when the ceiling will start coming down.









    Levels Of Moisture









In addition to poor fixing methods, a second contributor to sagging ceilings is moisture. Moisture can be caused in a ceiling by two main problems. The first problem is water penetrating the roof during rainy weather; thereby damaging a poorly sealed roof. The second problem is via condensation.





Plasterboard is essentially created using chalk placed between two layers of paper. When the paper becomes damp or wet, it will lose strength and rigidity resulting in sagging. This is why the building material needs to be kept dry for as long as possible over the building’s lifespan.





If a roof leak occurs and large amounts of water enter the structure through the leak, it is noticeable immediately and can be resolved by repairing or replacing the area of plasterboard ceiling. However, the problem can be bigger if there are condensation issues or a smaller leak due to a lack of roof ventilation or sarking. When this occurs, the problem may evolve over time resulting in a situation so great that it is impossible for the homeowner to notice the issue until it is harder to manage and widespread.





If the sagging ceiling is identified in time, it is possible to resolve the issue by re-screwing the damaged areas and repainting the ceiling. However, if the ceiling is left for too long the sagging plasterboard will adopt a bow shape and cannot be fixed. If the problem reaches the latter stage, the only option for resolution is to replace the sagging ceiling with a new ceiling.





Other issues placing added pressure to ceiling fixings is the application of extra weight to the ceiling, such as use of the roof space for storage of boxes. The suction effect occurring can also be seen, particularly in garages, because external doors are regularly opened and closed. Of course, ceilings will sag based on various reasons and the causes need to be assessed by professionals with experience in this area of the plasterboard trade.



Resources: causes and warning signs spontaneous ceiling collapse | why is your ceiling sagging





Common Causes of Water Damaged Ceilings





Here are 5 of the most common reasons for ceiling water damage:





    Leaky roofs are often caused by heavy storms and windy conditions. Once shingles are blown or knocked off the roof or they are worn down by age, it will become more difficult to keep water from working its way into the home.


    If water isn’t draining away from the home, it will obviously find its way inside. Gutters are meant to direct water away, but they can become clogged over time.


    Old or poorly secured pipes can easily develop leaks over time. The issue can also be spurred on by ill-prepared renovation work or other random accidents in the home. Leaking pipes are incredibly dangerous, with even the smallest pinprick of a hole making way for multiple gallons of water in the home.


    A bathroom that hasn’t been properly waterproofed with materials such as caulk or other sealants is another prime source for water damage, especially if there are additional floors, rooms, or a basement below.


    Appliances like dishwashers, refrigerators, and washing machines can all develop leaks over time. Water can pool behind or underneath the appliances, sometimes undetected, leading to a wide array of potential damage.






How to Dry a Ceiling That Has Water Damage





The best way to dry damp ceilings is to increase the airflow. However, not many homeowners will have the proper drying equipment. To completely dry a water damaged ceiling, you need to use an industrial fan (or two of them). These fans are designed for drying water damaged ceiling. All you have to do is point the fan towards the area of interest and switch them on to get the job done. Additionally, you need use an industrial dehumidifier to remove the moisture in the air.



After 2 to 3 days, check the ceiling for lingering moisture. If you find none, you should repair areas of the ceiling that have been heavily damaged to structurally sound. These sections should include the weak and warped sections of the ceiling.



Additionally, you need to throw away any sections of the ceiling that exhibits discoloration, mildew or mold growth, or any sort of bulging. Once you remove such ceiling section, you can repair the ceiling. to finish it off, paint the ceiling to leave as good as new.









What Causes a Roof Leak?





Here are 10 things that can cause your roof to leak:





    Age: As they get older, all roofing materials gradually lose their ability to keep water out of the home.


    Vent Leaks: Missing nails, cracked gaskets, or loose connections around vent pipes may allow water to penetrate the roof. Check vent pipes thoroughly, paying particular attention to the gaskets around them.


    Inadequate Slope: Roofs with a low slope are inappropriate for certain types of roofing and certain climates. Shingles on a low-slope roof in a windy climate may not be able to keep rain from getting driven underneath them, for example.


    Debris: If leaves, twigs, and other detritus build up on the roof, they can trap water and allow it to penetrate via capillary action.


    Poor Flashing: Over time, flashing can become loose and ineffective due to missing nails and cracked caulk.


    Damaged Ridge Caps: Damaged ridge caps can open up a vulnerability that allows rain into the roof. Neglectful contractors may damage ridge caps if they employ rope and harness systems without taking steps to protect them.


    Clogged Gutters: If gutters become clogged with leaves and other debris, they can cause standing water on the roof and allow it to soak through.


    Bad Drainage Design: Upper roof gutters that empty onto a lower roof can subject the roofing material there to undue saturation and produce leaks.


    Holes: Equipment removed from the roof (e.g. antennas) can leave behind vulnerable holes. If these are not properly patched, rain can enter the home.


    Missing Shingles: Over time, shingles can tear away due to high winds and age. Note that missing shingles can be difficult or impossible to detect from the ground.






Resources: 10 common reasons roof leaks





Water Damage Ceiling Mold





One of the more serious concerns of having a leaky roof or water damaged ceiling is the growth of mold. Below we answer a few questions about mold and what to do if you find mold in your roof or ceilings.





Can water damage cause mold?



Many individuals wrongly believe that it is only major water damage, like localised flooding, that causes mold to appear in a property. Water leaks of all sizes that are left unrepaired can lead to mold growth over time.





How long does it take for mold to grow from water damage?



Many are surprised by how quickly mold can grow and spread. In a dark, humid environment, mold can start to grow within 36 hours of the spores settling on a surface.





What do I do with a ceiling that has mold?







Make sure that you regularly inspect the property for leaks. If any are identified get them repaired immediately.


Ensure there is sufficient airflow in your home. Airflow can be improved by using extractor fans and opening any external doors and windows. Air circulation can be further improved in a home by rearranging furniture so it is not situated right up-against exterior walls.


Always turn on extractor fans when using the bathroom, kitchen or home appliances like the washing machine and tumble dryer. If there are no extractor fans in the property, they should be retrofitted as soon as possible to prevent further mold growth.


Ensure all attic spaces and crawl ways are well insulated and ventilated.


Vacuum carpets and solid flooring regularly to remove mold spores from the fibres and surfaces before they become airborne.


Mop up any spilled liquids and wipe away any condensation spotted immediately to prevent the possibility of mold growth.


Hire a trained professional to inspect the property for water leaks and mold. A specialist will often identify water leaks and mold spots missed by those not trained to spot such issues. What’s more, specialists can fix any identified leaks on site to reduce the possibility of future mold growth. A specialist can also monitor the humidity levels in your home and suggest devices to reduce them.






Roof Leak Mold On Walls



Having a leak in your roof can lead to getting dampness and mold on your walls. Here’s a resource we found in a local DIY forum:





I have a roof leak which I’m 94.8% sure is getting in from where the roof and vent meet (roof is in great shape otherwise). Water is coming in and running inside my walls, pooling & creating a water stain where the ceiling (slant roof) meets the outside wall in master bedroom. Water is running down that wall and pooling where wall meets floor too. No dripping water or wet carpet, just water stains on walls, mold growing inside wall, and mold on wall facing the room (already cleaned up with bleach).





Resource: mold in walls from roof leak diy or hire mold remediation company





What Causes a Ceiling to Collapse?





The main reasons a ceiling can collapse is water damage and poor quality workmanship or a combination of both of these. Water damage is usually the start of issues with your ceiling. The dampness puts structural pressure on your ceilings and starts to rot the materials. When the screws can no longer hold the ceiling in place it can collapse. Obviously this is a safety issue – so if you notice any of the following signs with your ceilings, make sure you hire an expert to check your ceiling out and at the very least make sure they are safe.







Warning Signs Ceiling is About To Collapse





Warning signs of a ceiling under stress may include:







Large or small cracks in your ceiling or cornice


Visible join lines throughout rooms


Screw holes showing


Bow in ceiling


Visible gaps between ceiling and timber rafters inside roof space


Pushing on sections of your ceiling and if there is any movement then your ceiling is sagging.


Noises or cracking noises






Sagging Ceiling Repair Costs





The damage caused by a water leak should be dealt with as soon as possible since it is quite a serious issue. That is because of the damage caused by a water leak can worsen with time. It may lead to sagging of the ceiling and its eventual collapse. The most important thing is to identify the cause of the water leak before addressing the problem. The first person to contact is a professional plumbing company. Once they have fixed the leak, you should consult a professional ceiling repair company to do the rest.





How much does it cost to repair water damage?





The repair rates would vary depending on the reputation of the contractor and the quality of the materials used. But you should expect to pay between $40 and $80 per hour for such repairs. The hourly rates don’t include material costs. In fact, cornices and decorative plaster products may cost much more. The size of the average ceiling installation job in Australia is approximately 170 square metres.



The following plasterboard installation costs should be taken as a rough figure:





$8 – $16 per m2 for plasterboard – only installation


$15 -$20 per m2 for plasterboard – supply as well as installation


$4 – $16 per linear metre for installation of cornice (mid-range)


$5 – $20 per linear metre for cornice supply and installation (mid-range)






Resources: how much does Gyprock ceiling installation cost





How much does it cost to fix a leaky roof?





It may mostly depend on the height and type of your roof. A steep roof on a single storey building will cost more than a gently sloping roof on a single storey house. The cost could be much more if you got a two-storey house. For example, the prices of major repairs of a 10-metre roof that is 3.0-metres high are as below:





A roof with a normal slope – $4500


Terracotta tiles will cost $7200


Colourbond or Zincalume roofing will cost $6300


A moderate slope will cost $5400


A steep slope will cost $6300






Resources: how much will it cost to repair a leaking roof





How much does it cost for water damage restoration?



A homeowner should expect to spend between $1,069 and $4,099 for such a repair. In fact, the average repair cost is $2,582. A licensed professional is essential to determine the cause and the extent of the damage. Such a professional will categorise and classify the damage caused to your home – which is two of the largest factors that should be taken into account when arriving at a final figure.





Resources:repair water damage





Is a burst water pipe covered by insurance?





Burst water pipe damage claims are some of the most common property claims affecting residential and commercial buildings in Australia. Even though the water pipe isn’t covered by most insurance policies, the resulting water damage losses are usually covered by such policies. When you hire a professional to repair the damage, it is important that the professional write down on the estimate the extent of damage to your property. In fact, all important information and photos of the damage should be passed onto your insurance company for further action. This is very important when repairing water damaged homes.





How much does a roofer charge per hour?





Depending on the type of roof, roofers can charge anywhere between $18 and $51 per hour, with the average being $27.70 per hour.





Recourses: roofing contractor hourly rates







via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/ceiling-roof-repairs-guide/

How Much Does It Cost To Repair a Water Damaged Ceiling in Brisbane and Gold Coast

It can be expensive to repair a water damaged ceiling in Brisbane and the Gold Coast. This is because a ceiling expert is required and they will have to identify and fix the source of the leak and then restore the ceiling to it’s former condition. Unless you want your ceiling to collapse or mould to grow in your ceilings, then this must be done.

So if you care about your home, you should immediately seek help from a professional ceiling restoration company. While exposed your ceiling can be further damaged by heavy rains!



The Average Cost of Fixing Water Damaged Ceilings in Brisbane and Gold Coast



It really depends on the extent of the damage, however the average cost of repairing a ceiling in Brisbane and Gold Coast is $2,164. The minimum you can expect to pat is $150 and the maximum is $6,000. Most costs fall somewhere between $1,214 and $2,254.



Call us on 08 6244 0970 for a free obligation free quote to fix your ceilings!



A leaky rook is the most common cause of water damaged ceiling in Brisbane and the Gold Coast. A burst pipe embedded within the walls of a house is another reason. Ceilings are typically made from drywall or plaster (also known as Gyprock). Homeowners usually only notice their roof is leaking when the see water dripping from the surface of the ceiling. The waters pools and then spreads along the ceiling until is drips in-between the ceilings panels. If you have a plaster ceiling the water will build up before dripping to the floor.



The pooled water stains the ceiling and degrades its integrity. Mould can form if the ceiling stays damp for several days and then harmful bacteria can spread through your home. As soon as you notice water on your ceiling you should call a professional restoration crew to fix it as quickly as possible.



Time it Takes To Repair



The process to restore your ceiling does take some time to complete. The first thing that needs to be done is that the dampness needs to be removed from your ceiling and or walls. Special dryers are used to dry out the damp areas. The quicker the ceilings and walls are dried the less likely mould will grow and spread.



The specific area that your ceiling is damaged and the extent of damage will determine the cost of repairing your ceiling. You’ll have to call the restoration company in Brisbane or the Gold Coast and get them to fully assess the damage before committing to an accurate quote.



Call Your Insurance Company And See Whether You’re Covered



Homeowners can spend thousands of dollars on restoration or repairs to a water damaged ceiling. But if you have insurance cover then the entire cost maybe covered. Check whether your insurance policy includes cover for water damage.



Find us at: Brisbane North Brisbane West Brisbane South Side Gold Coast Sunshine Coast









via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/cost-repair-water-damaged-ceiling-brisbane-gold-coast/

How Much Do Plasterers Cost In Adelaide?

When it comes to getting home projects carried out most of us want a high-quality finish. Plastering is really an craft which demands a great deal of competency if top quality work is to be accomplished.



This industry comes in a variety of forms, as is revealed in the diverse price rates. This means you need to sit back and consider the job and the plastering experience required before making your choice.



Hence, prior to you making arrangements with a plasterer you should consider the nature of your work as well as the amount of expertise needed.



Before employing a plasterer, you have to ask a few questions.





Are they licensed and accredited to undertake the job?


Are they insured?


You should find out how much time this project usually takes them to perform for you.


Are they in a position to provide written quotes?


Find out what the experience level is like with the kind of job you require them to undertake.




The cost of plastering in Adelaide varies between:





$20 – $70 per M2 (hard plasters)


$45 – $90 per square meter for wet plasters




Flat rates per room is how the majority of plasterers quote. The plasterer may charge a set price for the whole home. It will cost between $10,000 and $15,000 to plaster a 3 bedroom house in Adelaide. It’ll cost more for an ornate Victorian your home with the average being around $20,000.



Our South Australia Locations: Adelaide | Adelaide SA | Adelaide Hills | Port Adelaide







via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/how-much-do-plasterers-cost-in-adelaide/

2018 Ceiling Repair Costs in Adelaide, South Australia

You should get your ceiling fixed if you notice cracks or the paint chipping. The telling signs of significant problems are cracking noises or spots or other abnormalities. These types of telltale signs should cause concern and you should call an expert to look at them right away.





Ceiling repair costs in Adelaide range between AU$40/hr and AU$55/hr. We’ve found that the average price quoted by ceiling installers is AU$48/hr. Additional charges can add up depending on various circumstances. The size of the room, the materials used and other finishing touches such as mouldings or cornices. Elaborate ceiling designs can result in hourly costs in excess of AU$55/hr. Expect to pay closer to AU$40/hr if the ceiling is simple.



AU$45/hr in Victoria is the lowest average rates out of all of the States. AU48/hr in New South Wales is slightly higher than the rates in Victoria. Rates in Queensland and Western Australia are the highest at AU$50/hr.



Cost For Simple Ceiling Repair Jobs





In Adelaide you can expect to pay up to $200 for basic home ceiling repair and installation. Just be mindful that these are average prices. Expect to pay higher costs if you require insulation or the use of expensive materials.



The overall costs of ceiling repairs in Adelaide is influenced by various factors. The size of the room, the materials used and the extra finishing touches are all factors that impact the final ceiling repair cost.



Bigger rooms cost more than smaller room as more time and materials is required by the ceiling installers. If the ceiling is easy to install and only inexpensive materials are required then the cost will be lower. Many homes will require plasterboard for the ceiling installation. The ceiling repair may require additional materials such as planks of wood, tiles or screws. These additional materials will result in higher costs. The total costs will increase further if additional features such as cornices, textures and mouldings are required.



Now you can evaluate the various quotes you receive from ceiling installers in Adelaide. Whatever your ceiling repair job you can trust The Master Plasterers Adealide to provide competitive quotes.









via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/2018-ceiling-repair-costs-in-adelaide-south-australia/

2018 Ceiling Repair Costs in Brisbane and Gold Coast

If your ceiling is cracking and the paint is chipping you should think about getting it fixed. Major problems with your ceilings are easily identified. Have you noticed cracking noises, spots or other abnormalities? Don’t delay, call our ceiling repair specialists if you notice any of these issues.



Ceiling repair costs in Brisbane and the Gold Coast range between AU$40/hr and AU$55/hr. AU$48/hr is the average price quoted by ceiling installers. Additional charges can result from all of the following factors. Fancy moldings or cornices add additional costs as well as bigger rooms and using more expensive materials. Design that requires more attention to detail will result in hourly costs of AU$55/hr or more. Simple ceiling installations cost closer to AU$40/hr.



Cost in The Other Australian States



Home owners in Victoria pay the lowest rates, just AU$45/hr. AU48/hr in New South Wales is slightly higher than the rates in Victoria. AU$50/hr in Queensland and Western Australia is higher than both New South Wales and Victoria.





What Influences the Cost in Brisbane & Gold Cost



Basic home ceiling repair and installation quotes in Brisbane and Gold Coast can cost $200. This expectation is based on rooms of average size. Expect to pay higher costs if you require insulation or the use of expensive materials.



The overall costs of ceiling repairs in Brisbane and Gold Coast is influenced by various factors. The size of the room, the materials used and the extra finishing touches are all factors that impact the final ceiling repair cost.



Ceiling installers spend more time and use more materials on bigger rooms and therefore they have higher costs. If the ceiling is easy to install and only inexpensive materials are required then the cost will be lower. The most common material used for ceiling installation is plasterboard. The ceiling repair may require additional materials such as planks of wood, tiles or screws. These additional materials will result in higher costs. If textures, mouldings and cornices are required then this will increase the cost even further.



Now you can evaluate the various quotes you receive from ceiling installers in Brisbane and the Gold Coast. We hope that you choose The Master Plasterers for your ceiling repair job.







via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/2018-ceiling-repair-costs-in-brisbane-and-gold-coast/

The 10 Best Plasterers In Melbourne

Are you a property owner or a builder looking for high quality and professional plastering services in Melbourne?



There are several companies in the city, each claiming to be one of the 10 best plasterers in Melbourne. The question is, should you believe them?



We are here to help guide you in finding the best contractor for the plastering service you need. We have close links with reputable companies engaged in this business. To make it easier for you to make your choice, we have listed down the 10 best plasterers in Melbourne based on reviews of the services they offer.



The Master Plasterers Melbourne



Expert Plasterers Melbourne East



The Master Plasterers Northern Suburbs Melbourne







Atlantic Coast Painting: This company delivers high quality and professional services such as plastering—including the installation of Gyprock plasterboards— tiling, painting, and flooring among others.




Tuscany Services Group Pty Ltd: The specialty of this group is Venetian Plaster installation. But it also offers other services including hard plaster installation, plastering, concrete finishing, rendering, painting, decorating, sandblasting, and building maintenance.




Robbins Plastering: This firm has been in the plastering business for 40 years now, servicing both commercial and private properties. It specialises in doing ornamental cornices. It also offers other services such as restoration work, rendering and repair.




BAXA Property Services: Aside from plastering, this enterprise can do Gyprock installation and bathroom and kitchen renovations.




Walking Trowels Plastering: This group employs skilled technicians who can expertly do any plastering job, regardless of size.




Electrical Spotter Safety Observer: This firm offers various services such as plastering, painting, and plumbing. It is fully insured.




AKR Superior Plastering: This company has at least 10 years’ experience in doing plastering jobs for new homes, those undergoing renovations or extensions, and also commercial shops.




MT Property Maintenance: This firm says its artisans make sure their customers receive a professional personal service at competitive rates, using the latest products and finishes. It’s fully licensed and insured for $10,000,000 public liability.




S. Ceilings: Aside from plastering, this company engages in Gyprock installation, ceiling partitioning, insulation, home renovation, and other related services.




Abode Restoration: This group specialises in plastering work to restore historic buildings and antique homes. Its artisans also work as renderers, stonemasons and carpenters.




We know other contractors who can provide high quality plastering services and can rightfully claim to be one of the 10 best plasterers in Melbourne. We can make the right recommendations for you depending on the kind of plastering job you need. Call us, and we’ll do our best to help you.



The information in this article is courtesy of https://porch.com/melbourne-fl/interior-plastering/cs







via The Master Plasterers | Expert Plasterers at Your Service https://themasterplasterers.com.au/best-plasterers-melbourne/